What powerline technicians must know to stay safe
BY JIM HUTTER, Capital Safety
Most of modern life is powered by electrical energy, which is why transmission tower work continues to be an integral—yet extremely dangerous—part of the power distribution industry. The Occupational Safety and Health Administration (OSHA) requires that fall arrest or work positioning equipment must be used when working at elevated locations more than four feet (1.2 meters) above the ground on poles, towers,...
A coalition of large energy consumers and ratepayer advocates has filed a complaint with the Federal Energy Regulatory Commission (FERC), urging the agency to prohibit transmission owners from independently planning "local" transmission projects exceeding 100 kilovolts (kV). The coalition argues...
A comprehensive review of IEEE guidelines and documents BY JIM TOMASESKI, IEEE, NESC Main Committee, PAR Electric Every day, utility workers are risking their lives in work environments that involve high-risk activities such as working at extreme heights, managing or repairing energized...
Infrared safety: using thermal technologies to protect workers BY DOUG BARRY, FLIR Systems Disconnect switches, elbow connectors, cutouts, lightning arrestors, oil-filled circuit breakers, and other electrical components tend to heat up before they fail. The ability to detect overheating on such...
The 25 kV Class 200 Ampere loadbreak separable insulated connector system didn't always have today's reputation for safety and reliability. As 25 kV Class loadbreak connectors increased in popularity in the 1980's and 1990's, utilities reported unacceptably high numbers of flashovers...
A coalition of large energy consumers and ratepayer advocates has filed a complaint with the Federal Energy Regulatory Commission (FERC), urging the agency to prohibit transmission owners from independently planning "local" transmission projects exceeding 100 kilovolts (kV). The coalition argues...
In a significant shift, the Federal Energy Regulatory Commission (FERC) has decided to abandon its transmission incentives policy, particularly the construction work in progress (CWIP) incentives. This decision marks a pivotal change in how transmission projects are financed and regulated,...
Verifying the functionality and integrity of a grounding system is critical to maintaining a safe workspace. Unfortunately, the tests used to achieve this goal, as well as the standards used to assess them, have required a specialized skillset, often leaving these tests done improperly or not at...
For years, manufacturers of ground rods have strived to develop technical specifications for the electrical industry which address the specific needs and applications of clients and endusers alike. One reason for stressing the importance of this was to assure that the customer would receive what...
Taking care of your grounds and jumpers A lineman’s ground and jumper cables look and feel like they’re built to last forever, but looks can be deceiving. They get tossed in the truck, dropped in the mud, left hanging in the rain, and generally overlooked. With everyday use, we start...
When working in close proximity to exposed energized equipment or working on live electrical circuits, it’s necessary to protect not only the equipment being worked on but also the worker. Rubber insulating gloves and insulated hand tools are vital components of a successful PPE system and...
