Latest News From The T&D Industry
You’re serious about your electrical test instruments. You buy top brands, and you expect them to be accurate. You know some people send their digital instruments to a metrology lab for calibration, and you wonder why. After all, these are all electronic — there’s no meter movement to go out of balance. What do those calibration folks do, anyhow — just change the battery? These are valid concerns, especially since you can’t use your instrument...
Removing hazards caused from in-vehicle computing
BY SCOTT BALL, Motion Computing
No utility company would send a worker out in a truck with a known safety defect. North American electric utilities may not realize, however, that by failing to ensure that computing devices are used safely within their vehicles, management could be putting their employees and the public at risk. Even worse, if an accident was to occur, the utility could be held liable. Access to mobile computing is now the rule rather than the exception. The latest generation of mobile-friendly applications has made computing devices essential for connecting...
What powerline technicians must know to stay safe
BY JIM HUTTER, Capital Safety
Most of modern life is powered by electrical energy, which is why transmission tower work continues to be an integral—yet extremely dangerous—part of the power distribution industry. The Occupational Safety and Health Administration (OSHA) requires that fall arrest or work positioning equipment must be used when working at elevated locations more than four feet (1.2 meters) above the ground on poles, towers, or similar structures if other fall protection has not been provided. There is an exception for “a qualified employee” climbing or changing location on poles,...
