Exploring 3-D design techniques for electrical substations
BY MIKE MINELLI, & HAROLD HARKONEN, Nordmin Engineering
Since the 1970s, engineering consulting firms typically have been designing substations using two-dimensional computer aided design software (CAD). This common technique produces two-dimensional drawings that are completed individually by designers. Any change to the design requires the designer to manually incorporate the change in each individual drawing.
This process becomes an inefficient design practice as it increases the potential for...
Sulfur hexafluoride (SF6) insulates medium- and high-voltage switchgears around the world. In its pure form, this non-toxic, inert gas helps the power transmission & distribution (T&D) industry operate more safely by extinguishing high-temperature arcs. With a much higher...
According to the American Public Power Association, squirrels are among the top causes of power outages across the United States. Depending on your geographic region, there may be no “quiet” season - squirrels and other “Critters” can be active all year long.Since...
An Infrared Inspection Window is used to separate environments of differing pressures or temperatures while allowing light energy at a specified electromagnetic wavelength to pass between the two environments. They must meet the strength and environmental requirements for the type of equipment in...
Same day switching avoids the extended outages and human and equipment costs associated with inoperable and broken switches.The vast majority of air break disconnect and ground switches in electric power networks typically receive no appreciable maintenance. This invariably results in the inability...
One of the important trends in design of new overhead lines over the past 20 years has been development of structures and designs that are less obtrusive and more pleasing visually. Much the same process has also been going on at substations. For example, even 25 years ago, efforts had already been...
Every day across the country, animals enter substations for warmth, food, security, or simply out of curiosity. In many areas, wildlife intruding into power equipment has become the leading cause of outages – even more common than storms or vegetation.A single substation outage can cost tens...
As the world’s technological landscape continues to grow and the demand for electricity increases, so too do the occurrences of power outages. Check out Critter Guard’s curated list where we track power outages statistics and data below or check out our power outages infographic. Power...
An Infrared Inspection Window is used to separate environments of differing pressures or temperatures while allowing light energy at a specified electromagnetic wavelength to pass between the two environments. They must meet the strength and environmental requirements for the type of equipment in...
Sulfur hexafluoride (SF6) insulates medium- and high-voltage switchgears around the world. In its pure form, this non-toxic, inert gas helps the power transmission & distribution (T&D) industry operate more safely by extinguishing high-temperature arcs. With a much higher...
Same day switching avoids the extended outages and human and equipment costs associated with inoperable and broken switches.The vast majority of air break disconnect and ground switches in electric power networks typically receive no appreciable maintenance. This invariably results in the inability...
